Our Signature Finish provides you with the finest work available. It begins with chemical stripping of the old finish and low pressure powder blasting to remove rust and paint residue. The frame is then carefully inspected for defects or cracks before epoxy chromate primer is applied. Extra time is spent repairing dents, rust and other surface imperfections. After re-priming and careful hand sanding, polyurethane enamel color coats are applied, decals installed (if desired) and clear coats generously laid on with additional coats over decal areas. After curing in an oven, a careful hand sanding yields a perfect surface with decals smooth to the touch. This surface allows the final clear coats to flow out for the ultimate in depth and gloss. The frame is re-cured in the oven to ensure maximum durability and toughness before final inspection.
Any DuPont Imron Color is available for $750, and…
Custom Colors | Pearls | $200 |
Candies or Flamboyants | $200 | |
Fades | Two Color Fade | $200 |
Each Additional Color | $100 | |
Contrasting Painting | Head Tube | $100 |
Seat Tube (entire tube) | $100 | |
Fork Crown | $100 | |
Head Lugs (both) | $200 | |
Lug Lining | Choose Any Color | $250 |
Decal Sets | Price includes installation. Sold with repaint only. | $60-150 |
Head Tube Badge | Clean, seal, and reinstall. | $50 |
Touch Up Paint | ( small vial ) | $20 |
To arrange a custom paint job, Call Joe Bell.
Mask Existing Chrome | Rear Dropout Faces and Right Chainstay | $60 |
Rear Dropout Faces | $40 | |
Front Dropout Faces | $25 | |
Head Lugs ( Nervex and other hand-cut lugs extra ) | $100 | |
Front Derailleur Hanger | $25 | |
Fork Crown | $60 | |
Seat Lug | $75 | |
Complete Rear Stays and Dropouts | $75 | |
New Chrome | Front Dropout Faces | $200 |
Fork Crown and Front Dropout Faces | $350 | |
Complete Fork | $350 | |
Rear Dropout Faces | $250 | |
Rear Dropout Faces and Right Chainstay | $400 | |
Rear Dropouts and both Chainstays | $450 | |
Head Lugs ( both ) | $400 | |
Seat Lug | $200 | |
Front Derailleur Hanger | $75 | |
Complete Rear Stays and Rear Dropouts | $500 | |
Braze-Ons | Most Braze-Ons ( per pair ) | $30-75 |
Jet Vent ( stainless steel internal brake guide in top tube ) | $175 | |
Frame Repair | Rear Dropout Replacement ( each ) | $300 |
Main Tube Replacement ( includes alignment ) | $350 | |
Precision Frame Alignment ( includes BB facing ) | $90 | |
Precision Fork Alignment | $50 |
Call JB at 619 469-4312
©2016 JB and Joe Bell Bicycle Refinishing, all rights reserved. ALL ANALOG: paint jobs made by hand. Home - Photographer Chris Wimpey - Web Dev